posted Aug 12, 2015, 9:32 AM by Danny Xu
[
updated Aug 12, 2015, 9:49 AM
]
FX-8350 Scientific performance: http://techreport.com/review/23750/amd-fx-8350-processor-reviewed/12See the following CPU config http://www.legitreviews.com/amd-fx-8350-8-core-black-edition-processor-review_2055/14About AMD Turbo Core (why it should be disabled) http://www.tomshardware.com/answers/id-2259896/enable-amd-turbo-core.html
http://www.overclockers.com/forums/showthread.php/724362-FX-8320-turbo-boost-not-working?p=7382061#post7382061ASUS BIOS Explained: http://www.overclock.net/t/1348623/amd-bulldozer-and-piledriver-overclocking-guide-asus-motherboard- Ai Overclock Tuner - Auto, Manual, DOCP
- CPU Ratio - Adjusts the CPU Clock Multiplier (CPU Multi x FSB = CPU Speed)
- AMD Turbo CORE Technology - Disable in order to manually Overclock the CPU
- CPU Bus Frequency - A.K.A. FSB. This adjusts the base clock for, HTT, NB, CPU, DRAM.
- PCIe Bus Frequency - Defaults to 100, not recommended to change, as it may damage GPU/HDD.
- Memory Frequency - Adjust the Memory Divider. (DRAM Divider x FSB = DRAM Speed)
- CPU/NB Frequency - Adjust the CPU/NB Divider - Defaults to 2000-2200Mhz
- HT Link Speed - Adjust the HT Link Divider - Defaults to 2600Mhz
- CPU Spread Spectrum - Disable - to increase overclock stability
- PCIe Spread Spectrum - Disable - to increase overclock stability
- EPU Power Saving Mode - Disabled
- CPU & NB Voltage - Offset and Manual Mode - Change to Manual Mode for Overclocking
- CPU Manual Voltage - ** Available under Manual Mode - Increase the CPU Voltage when increasing the CPU frequency.
- CPU/NB Manual Voltage - ** Available under Manual Mode - IMC Voltage
- Increase when overclocking memory - may require an increase when
increasing CPU frequency.
- CPU VDDA Voltage - Default 2.5v. Higher setting 2.695v will
stabilize voltages under load but increases temps. Lower setting 2.2v
will lower temps.
- DRAM Voltage - Adjust the voltage for DRAM. Default 1.5v
- NB Voltage - Adjusts the voltage for the North Bridge Chipset on the motherboard - Default 1.1v
- NB HT Voltage - Adjusts the voltage for the Hyper Transport - Default 1.2v
- NB 1.8V Voltage - Adjust the voltage for the Chipset/CPU Multiplier. Higher multi requires more voltage
- SB Voltage - Adjusts the voltage for the South Bridge Default 1.1v
Recommended Settings up to 5.0Ghz.M5A97 Users Please see the M5A97 NotesRECOMMENDED SETTINGS (Click to hide)- Ai Overclock Tuner - Manual
- AMD Turbo CORE Technology - Disabled
- DRAM 1600Mhz @ 1.5v
- CPU/NB Frequency - 2200Mhz
- HT Link Speed - 2600Mhz
- CPU & NB Voltage - Manual Mode
- CPU/NB Manual Voltage - Set between 1.25v-1.3v (Increases stability for high overclocks)
- CPU LLC - Ultra High (75%)
- CPU/NB LLC - Auto
- CPU Current Capability - 130%
- CPU/NB Current Capability - 130%
- DRAM Current Capability 130%
- Cool'n'Quiet - Disabled
- C1E - Disabled
- SVM - Disabled unless running Virtual Machines
- Core C6 State - Disabled
- HPC Mode - Enabled (Some motherboards this has caused freezing so keep that in mind)
- Amp Master Mode - Disabled
***The
power saving features should be disabled until you find your stable
overclock. Then feel free to re-enable them to benefit from power
savings
|
|
